All Products

Kasco Marine Impeller De-Icers

Protect your docks, boats and submerged structures with a Kasco Marine de-icer. Benefits Kasco Marine de-icers, also known as circulators or agitators, are available at CanadianPond.ca, your Kasco Marine dealer in Canada. Winter ice can damage your dock to the point of complete destruction. The thicker the ice gets, the more it also expands. This can literally destroy your dock. When the water level in a lake changes in the winter, the ice surrounding your posts can tear them off the sea floor.  The ice clinging to the structure shows how securely the expanding ice was attached. Kasco Marine de-icers are specially designed to be suspended from a dock or boat to prevent damage caused by ice expansion and water level variations. This animated video illustrates two of the ways you can position your de-icer. Kasco de-icers use a propeller system that creates a vertical or horizontal movement of water to prevent ice from forming near docks, boat shelters and shorelines. The de-icer performs by moving warmer, denser water upward from the bottom of the pond or lake and circulates the water upward to the surface and sideways creating an agitation that reduces or eliminates ice build-up creating a large ice-free surface. Installation with a horizontal float or with a universal dock mount are options that allow you to precisely direct the movement of the water to strategically and precisely de-ice a particular structure. Ideal for fresh or salt water applications. How to choose your deicer Choosing the right de-icer is easy, refer to the ice opening chart (pdf) to find the best model and application kit for your needs. If Kasco de-icers do not meet your needs, visit the Thawline Linear De-Icers page. All Kasco de-icers are also available in 240V and/or 50 Hertz for the European market, call us for more information. Kasco Marine De-Icing Chart (PDF) Timers & Control Box Options Controlling your Kasco Marine de-icer with a thermostat or timer is a great way to save energy and extend the life of your de-icer by operating it only when needed. The C-10 Thermostat allows you to determine an accurate temperature under which your unit starts.The C20 Thermostat and Timer Control Unit combines the schedule of the day with the temperature at which you want your de-icer to operate. Technical Specifications Suspension ropes - Braided polypropylene yarns. 20′ x 5/16″, 2 lengths included. Galvanized steel protection cage - Propeller protection. Vinyl coated for easy handling. High quality propeller - Specially designed for maximum whirl at minimum energy cost. Power cable - 25 feet of submersible power cable that remains flexible in the air despite temperatures as low as -45ºC (-50ºF). Waterproof connections for ease of installation and handling. Longer lengths are available as an option. Zinc Anode - Changeable anode protecting against electrolytic corrosion. (The anode must be checked annually and replaced if necessary to ensure warranty coverage). Seals - Double seal system to prevent oil leakage from the engine. Shaft - Series #316 stainless steel, suitable for salt water. Ball Bearing - Ball bearing lubricated in oil for better heat dissipation. Oil - The oil used allows for limited maintenance, increased heat dissipation and better protection against moisture. Motor - Standard design, 120V single-phase direct current, oil-immersed, overload-protected motor with automatic circuit breaker. Capacitor - The capacitor ensures proper starting and operation of the motor. Motor housing - Stainless steel, corrosion resistant, saltwater compatible. 2 year warranty Check with local authorities to ensure that the addition of icebreakers is permitted in your municipality. The de-icing area should be well marked with a sign to warn all persons of the hazard. To be used with all types of de-icing systems. Caution: Avoid bathing too close to the de-icer to reduce the risk of electrocution. Tech Sheet (PDF) Owner's Manual (PDF) Maintenance of Kasco Marine Units (PDF) Installation / Security Suspension with ropes - Vertical position - For de-icing in a circle shape All Kasco de-icers include 2 x 20-foot ropes to suspend the de-icer under the dock or boat. These ropes are included in the de-icer box. Hang the system vertically on either side of the structure at a depth of 4 to 5 feet from the water surface. A vertical installation produces a circular de-iced surface. Another possibility is to attach the de-icer to each side of the boat with the suspension ropes so that the de-icer follows the tide or water level. Horizontal float mount – Horizontal position – Produces long elongated pattern when no dock is available You can also use the optional horizontal float set to create an elongated ice free space. The de-icer installed under the horizontal float can be positioned at different angles for added versatility. Ideal for : Shallow water Places where there are water level fluctuations such as: a tide or in a large lake where the waves are high. Sites to be de-iced where there are no docks or structures. Installation with universal dock support - Angled position - For elongated de-icing The Universal Dock Support is made from thermal plastic components, corrosion protected steel and stainless steel to withstand the worst marine conditions. A stainless steel rod of 1″ diameter and 10 feet in length must be supplied by the purchaser to attach the de-icer and dock and structure mounting kit. With the new Easy Lock handle, adjustments in the water are child's play.This option is ideal for creating an angle at the de-icer. It gives a very good precision of the surfaces to be de-iced. It is often easier to de-ice a boat by installing the de-icer at the bow and angling it towards the stern of the boat. If the water movement is directed towards the shore or a retaining wall, the water current will be directed on each side of the shore or wall to create a "T" shaped de-icing section. Industrial Dock Mount Kasco's industrial dock support, made of corrosion-resistant metal, requires 1.5" I.D. stainless steel pipe threaded at both ends and measuring a maximum of 10 feet (not included). It is manufactured to meet the most stringent environmental requirements. Moreover, thanks to its unique design, you can easily modify the angle, depth and positioning of the de-icer. Security Check with local authorities to ensure that the addition of de-icers is permitted in your municipality. The de-icing area should be clearly marked with a sign to warn anyone of the danger. For use with all types of de-icing systems. Click here to purchase the thin ice sign. Caution: Avoid bathing too close to the de-icer to reduce the risk of electrocution.

$1,403.60 CAD - $2,392.50 CAD

See the details

Bacterius® 1B, Dry Concentrated Beneficial Bacteria

Our Bacterius® 1B product is effective in removing organic matter that causes water quality problems. Reduces odors and cloudy water associated with various types of organic waste that accumulate in lakes and ponds. And all in a soluble format for easy dosing! Benefits Bacterius® 1B boxes contain small, pre-measured packets of lyophilized (freeze-dried) natural bacteria. Bacterius® 1B reduces the accumulation of decaying plants, grass clippings, leaves, fish waste and other organic materials and helps: Control algae growth Improve water clarity Provide odor control Reduce bottom sludge Control problematic nutrients that promotes algae growth Reduce ammonia, nitrates, nitrites and phosphates Enhance the aquatic environment Technical specifications Bacterius® 1B is packaged in pre-measured water-soluble packets, to allow for easy dosing and easy application. Bacterius® 1B natural bacteria dry formulation consists of billions of microbial cultures made up of beneficial bacterial strains specifically chosen to reduce ammonia levels, nitrates, algae and bottom sludge consisting of both cellulose and lignin components from dead and decaying algae and vegetation. The pouches are made of water-soluble cellulose pouches and include barley straw to kisck-start the bacterial growth. Bacterius® 1B is an effective treatment to remove organic matter that causes water clarity problems. Bacterius® 1B reduces the odor and murky water associated with various types of accumulated organic wastes in lakes and ponds. From water gardens, to basins containing koi and/or goldfish, to lakes and ponds, Bacterius® 1B is a very affordable treatment to help preserve good water quality. Its unique composition merges various bacterial strains, allowing for an affordable and effective treatment. These bacteria present no danger to your fish, other animals or any human beings. In bodies of water, the accumulation of dead plants and animal waste forms an organic layer that reduces the available oxygen through decomposition and discharges pollutants, such as hydrogen sulfide (H2S), into the water. In some cases, the loss of oxygen can be so pervasive as to cause massive deaths in fish populations. The stress caused by low water quality can also reduce the fish's growth and make them more sensitive to disease. The micro-organisms contained in Bacterius® 1B feed on the waste produced by the plants and animals in the water body. The by-products caused by this natural transformation are carbon dioxyde, water and a protein-rich biomass of bacteria. Fish and invertebrates, such as zooplankton, snails, crayfish and other members of their respective families, all feed on this bacterial biomass. The waste produced by Bacterius® 1B becomes a natural source of food for fish and other aquatic fauna. With 1 billion viable bacteria (CFU) per gram, Bacterius® 1B is very popular among lake, pond and water garden owners. It is a very good tool in helping aquatic ecosystems naturally. Box content : 10Lbs box = 30 pouches / 25Lbs box = 75 Pouches Living product: avoid freezing and humidity exposure.FOR A LARGE-SCALE USE, PLEASE CONSULT US. We guarantee that the product has been manufactured under strict quality control standards that ensure optimal product quality. Tech Sheet (PDF)SDS (PDF) Dosage and Application Dosage Weekly dosage varies depending on the application, the fish and plant density and the amount of organic matter. Conditions needed: +10 °C / 50° F, pH 5 – 9 Application of dry bacteria Bacterius® pond bacteria products come in soluble pouches that are thrown into your pond. They work best when they are tossed near your aeration system, floating fountain or in-flowing water source or cascade. The movement of the water helps “steep” the bacterial pouch, much in the way a tea-bag is helped to release its content by adding gentle agitation. If there is little to no surface movement or aeration system, the pouches should be cut open and mixed in a bucket with pond water and then splashed uniformly across the pond surface in much the same way liquid bacteria is administered. If you do not have an aeration system or any other area of consistently flowing water, it is best to apply your bacteria in windy conditions. The wind will helps disperse your bacteria and give your pond some more oxygen for them to breathe. Sometimes, the easiest solution can be to simply throw the pouches on the water's surface and let nature do the rest. What's most important is not the way in which you administer the dosage, but the regularity at which it is applied! If your pond is already infested with algae and has poor water quality, an initial “shock treatment” (double dose) of a high dose of Bacterius® 5B bacteria should be done, followed by a treatment the following week and then a treatment every two or three weeks depending on the results obtained. A pond which is beginning to show the initial problems inherent with murky water and algae growth, but has not yet progressed to an alarming state of eutrophication requires a milder initial treatment, followed by a maintenance dose. For ponds and water gardens that are relatively healthy a low maintenance dose is added on a two or three-week program depending on environmental factors and achieved results, to prevent any nasty surprises. Either way, every pond is different and their treatments must be adapted to the results observed after their first applications as well as to the urgency in fixing the problem. NOTE: Bacterius® is composed of natural bacteria, that were especially created to restore and maintain the quality of water-based ecosystems. The bacterial content of Bacterius® did not undergo any genetic engineering; they are 100% natural and exist naturally in the earth, air and water. The principal effectiveness of these bacteria lies in their ability to secrete enzymes which degrade organic matter and help clarify pond water. The bacterial stocks are absolutely without danger to the environment, plants, people and animals. Information appearing in this website does not constitute in any way a guarantee of performance. Each case is different and dependent on a myriad of environmental and ecological factors. We assume no responsibility for the misuse of this product.

$169.00 CAD - $379.00 CAD

See the details

CanadianPond Dry Aquatic Dye

CanadianPond Aquatic Dye in dry soluble packets is a highly concentrated dye that blocks UV rays entering the water to reduce the growth of submerged aquatic plants. Safe for the environment and ideal for treating large ponds and lakes. Each 4oz soluble packets can treat an area slightly smaller than one acre. Benefits Pond dye helps block UV rays that enter a pond. It is the UV rays that go deep into a pond providing light for photosynthesis required for plant and algae growth. When we use a pond dye, we block some of that light, helping control growth of some algae and some unwanted submerged aquatic plants. Filters sunlight and provides an aesthetically pleasing, natural appearance to pond water; Keeps water temperature cooler; Blocks up to 40% of the sun’s rays to effectively starve the growth of existing algae and formation of new growth; Contributes to algae and aquatic weeds reduction in garden ponds & small lakes; Easy to apply and lasts 4 to 6 weeks depending on water flow. Technical specifications With our CanadianPond NATURAL Aquatic Dye, we carefully chose shades of blue and grey, with a touch of black, to give the effect of deep, cool water, that is highly reflective of UV rays while appearing as natural looking as possible. Think of a deep, cool lake that you would find in the Canadian Shield, and recall how the light reflects off the water surface, onto the moss covered Canadian Shield: this is the effect that CanadianPond NATURAL Dye can have in your pond. Double bagged with water soluble pouches, simply toss as is! Available only in a dark natural blue colour; Super-concentrated formula (>84% pure pigments); Will not stain plants, pets, birds or swimmers when applied at the recommended rate; CanadianPond NATURAL Dye is not harmful to the environment; Completely free of pesticides and herbicides. We guarantee that the product has been manufactured under strict quality control standards that ensure optimal product quality. Tech Sheet (PDF) SDS (PDF) Dosage and Application 1 soluble pouch will treat 2 500 m³ (slightly smaller than 1 acre pond with a dept of approx 6 ft deep) Doubled dry soluble (corn based) pouches; simply toss into pond or lake and within 1-2 hours the water body will be colored. Can be mixed quickly and evenly throughout the pond with the use of a fountain, aerator or similar mechanical device. The dual pouch system will dissolve in the water within one minute, the double pouch system is there to protect your fingers and clothes from stains! Important: do not cut open the pouches! Repeat monthly or as needed, as pigments will oxidize and gradually disappear. This product does not contain bacteria. Use Bacterius® 1B, 5B, C, N, POND, EQUINOX for sludge control and reducing nutrients. Avoid contact with eyes. Do not ingest. Keep out of reach of children. Reapply product as needed. Will stain clothing. Do not freeze. FOR A LARGE-SCALE USE, PLEASE CONSULT US.

$88.00 CAD - $381.00 CAD

See the details

Kasco Deicer Replacement Propellers

Replace your damaged Deicer propeller with a genuine Kasco propeller. Choose the item according to the size of your unit. Technical specifications Kasco Deicer motor force Replacement propeller model # 1/2 HP (2400) Deicer - SKU 240175 3/4 HP (3400) Deicer - SKU 340130 1HP (4400) Deicer - SKU 440405 Warranty: 1 year against manufacturing defect In the figure below, you can find de Kasco Marine Deicer, the propeller is the letter A. Watch this video to see how easy it is to change propellers.

$45.01 CAD - $95.70 CAD

See the details

Kasco Marine Floats & Dock Mounts

We provide a range of mounting options for your de-icers and circulators, ensuring optimal placement and water flow. Choose the option that suits your needs, or feel free to contact us for guidance! Universal Dock Mount Kasco’s universal dock mount is made out of stainless steel mounting hardware and requires a corrosion-resistant stainless or galvanized steel pipe (1″ I.D. maximum 8 feet long, not included) making it a great choice for docks, piers, marinas and other waterfront property. A pipe of this kind can commonly be found in the plumbing section of most hardware stores. Using its unique design, you can easily change the de-icer’s angle, depth and position. Will fit units 1 HP or smaller. Assembly manual PDF: Click here to download Manufacturer: Lifetime The picture below shows what is included in the box: Industrial Dock Mount Kasco’s industrial dock mount features extra heavy-duty stainless steel mounting hardware making it a great choice for marinas and other properties with strong tides, currents, or high volumes of boat traffic; they work better in harsher environments. Using its unique design, you can easily change the de-icer’s angle, depth and position. PLEASE NOTE: you must buy a thick-walled galvanized or stainless steel pipe to complete this dock mount kit (the pipe is not included). The pipe should be 1.5″ I.D., schedule 40, and no longer than 10 feet long. One example would be galvanized steel dock posts (1 11/16” O.D.), commonly available in hardware stores. Will fit all sizes deicer units, including 2 HP and over. Manufacturer Warranty: Lifetime Assembly Manual PDF : Click here to download Horizontal Float Kasco Horizontal Float Assembly 213001 is the perfect mounting option for all Kasco de-icing and circulator units. Works great where no dock or boat is available to mount the unit to, as well as in shallow water operations and in areas where large tidal fluctuations occur. Warranty: 1 year

$493.00 CAD - $826.50 CAD

See the details

Weed Shear - Aquatic Weed Cutter

CanadianPond.ca offers hand tools designed for cutting aquatic plants from lakes and ponds.  The Weed Shear allows you to maintain the aquatic vegetation in your pond or lake. *Also available in combo with the RakeZilla: Select the model COMBO to get the discount. Weed Shear (Weed Cutter) Control unwanted and invasive aquatic plants with our knives for aquatic plants. Many cottagers suffer from the problems associated with aquatic weeds on the shoreline, a problem that becomes more acute as nutrient-rich sediment accumulates in the lake and water quality changes. CanadianPond.ca offers different packages designed for cutting and collecting aquatic plants from lakes and ponds. Technical specifications The Weed Shear is designed to cut the weeds and plants that are submerged in the water of your pond or lake, such as young cattails, Eurasian Watermilfoil and Hydrilla verticillata. Works great for shoreline and deep water. With each cast, the Weed Shear cleans a section of 122cm (48 inches) wide. With a weight of only 3.6 kg (8 lbs), it is possible to cast it up to 7.6m (25') and more while being heavy enough to sink to the bottom of the water, where it is most effective. Ideal for cutting in shallow or deep water Cutting at the base of the plants It offers little resistance since the knife cuts the plants rather than dragging them with it. Dimension and weight of the box: 22 x 5 x 100 cm, 4.7 kg, (8.5 x 2 x 39.5'', 10.4 lb) Includes a blade sharpener (Optional replacement blade available) 1 year warranty If you have a lake or beach infested with mature aquatic plants and want to quickly eliminate these undesirables, the Weed Shear includes a 25-foot rope and a sharp blade. Assembling the knife is very easy and usually takes less than 10 minutes. The blade of the Weed Shear is very sharp, so it is important to always keep the protector on the blade when not in use. Please ensure that the clips are securely inserted into the handle before using the aquatic knife. We only sell tools that we would use ourselves. These tools are designed to make weeding work easier and more efficient. Each aquatic plant tool is also sold separately. A sharpener is already included with the purchase of the Weed Shear, but is also available for purchase individually. Click here to visit The Rakezilla (Weed Rake) web page

$10.50 CAD - $473.00 CAD

See the details

Replacement kits for Kasco compressors

CanadianPond offers piston repair kits for Kasco Marine's Teich-Aire compressors.  If you are unsure of your compressor model, contact us with your serial number or a picture of your compressor and we will help you make the right choice!  Other repair kits are also available upon request. Description Repair kits for Kasco Marine's Teich-Aire compressors used in CanadianAir aeration systems and Thawline de-icing systems. Technical Specifications 1/4HP : One (1) kit is needed to repair one KM-60 1/2HP : Two (2) repair kits are needed to repair one (1) (KM-120) Teich-Aire Compressor 3/4HP : One (1) repair kit is needed to repair one (1) dual piston KM-200 compressor Warranty: 1 year against manufacturing defects Service Center We are the authorized service and repair center for Kasco Marine in Canada. In addition, we can also assist you with repairs on systems of the following brands: Hiblow, Seabin, US Solar Mounts, Vertex Water Features, AquaMaster Fountains.

$108.06 CAD - $222.11 CAD

See the details

Kasco Marine Timers & Control units

Control boxes operated as Thermostat, Timer and Photocell options. Benefits Whenever you are dealing with electricity and water, safety is always the first and foremost concern. That is why Kasco’s Fountains, Robust-Aire Aerators, Water Circulators, and Impeller De-Icers and Control Panels are ETL approved to UL and CSA standards for safety in the water. Kasco’s Control Panels come standard with all fountains and are optional with de-icers or circulators. The Kasco Marine Timer and Control Panels are the interface through which you can control your aerators, circulators, fountains and de-icers. They will protect your equipment from power surges and hefty electrical bills! Use the control panels to turn your equipment on and off using the timer function, through perceived light in the photo cell, by temperature or any combination of these features. Available in 120V and 240V models. Technical Specifications Kasco offers 120V (C-10, C-20 and C-25) and 240V (C-85, C-95) control panels, that include GFI protection rated to protect you and your equipment from harm. A photo cell option is available on the C-25 for use with the optional lighting kits, and a timer dial for programming operation (C-20 and C-25). Contact us for pricing for 240V models: C-85 (240V single phase, Aquaticlear, Fountains and Surface Aerators up to 2HP) C-95 (240V single phase, 3 - 5HP Fountains and Surface Aerators) C-10 Manual C-20 Manual C-25 Manual Models details C10: Controls what temperature the unit turns on when Deicing C20: Controls what temperature and time unit turns on when Deicing C25: 24-hour timer, GFCI protection and photocell outlet for optional lighting control *C85 and C95 control boxes can be ordered upon request Security Check with local authorities to ensure that the addition of de-icers is permitted in your municipality. The de-icing area should be clearly marked with a sign to warn anyone of the danger. For use with all types of de-icing systems. Click here to purchase the thin ice sign.

$188.50 CAD - $477.36 CAD

See the details

DeSkuzzer, manual pond skimmer

New product offered by CanadianPond.ca, the DeSkuzzer is a 4.5 feet wide floating skimmer that allows you to easily recover floating debris from your pond, such as dead leaves and duckweed. This tool is perfect for cleaning small areas where debris is concentrated. Benefits The DeSkuzzer 2.0 is a 5-foot wide floating skimmer net that collects surface debris as it is dragged along the water's surface. This design uses side flotation to allow more debris to enter the collection screen. Used for collecting anything that floats on the surface of your lake or pond, such as floating algae or floating weeds, like duckweed. When the collection net is full, the DeSkuzzer should be emptied onto the shoreline and then redeployed until all surface debris is gone. Most floating weeds, like duckweed, seem to grow in areas with less water circulation such as creeks and small ponds. Not suitable for removing pollen or cyanobacteria. The netting has a mesh size of 2mm, any debris larger than this can be removed by the DeSkuzzer! Demonstration video of the DeSkuzzer: Technical Specifications Heavy-duty screen collection net 24-foot pull line to allow for longer casts Folded net edges to help retain debris Mesh size 2mm Not designed to collect pollen and cyanobacteria Warranty : 1 year coverage on manufacturing defects Instruction (PDF) : Click Here Included Materials and Use The DeSkuzzer is delivered with everything you need (assembly required). Designed to be used in several ways: Held in front of a boat with a pole or a hook Pulled behind a boat Thrown and retrieved by a person on land Pulled by a person walking in the water If the body of water is narrow enough, have one person on each bank facing each other and alternatively pulling the DeSkuzzer from one end to the other so it goes back and forth across the water. -Boat not included

$399.00 CAD

See the details

Products

Aeration Accomplishment

Products

Deicing accomplishment

Products

Floating Fountain Accomplishment

Products

Bioaugmentation Accomplishment

Products

Aquatic Tools Accomplishment

Applications

Visit Bubbletubing.com website! Dedicated to this technology

Contact Us

Contact us to learn more about our service offering

Accomplishments

Categories

Degradation of Organic Matter with Aeration

Resources

Categories

New Articles

All Products

Kasco Marine Impeller De-Icers

Bacterius® 1B, Dry Concentrated Beneficial Bacteria

CanadianPond Dry Aquatic Dye

Kasco Deicer Replacement Propellers

Kasco Marine Floats & Dock Mounts

Weed Shear - Aquatic Weed Cutter

Replacement kits for Kasco compressors

Kasco Marine Timers & Control units

DeSkuzzer, manual pond skimmer

Do you have a question or would like more details?