Deicing

Kasco Marine Impeller De-Icers

Protect your docks, boats and submerged structures with a Kasco Marine de-icer. Benefits Kasco Marine de-icers, also known as circulators or agitators, are available at CanadianPond.ca, your Kasco Marine dealer in Canada. Winter ice can damage your dock to the point of complete destruction. The thicker the ice gets, the more it also expands. This can literally destroy your dock. When the water level in a lake changes in the winter, the ice surrounding your posts can tear them off the sea floor.  The ice clinging to the structure shows how securely the expanding ice was attached. Kasco Marine de-icers are specially designed to be suspended from a dock or boat to prevent damage caused by ice expansion and water level variations. This animated video illustrates two of the ways you can position your de-icer. Kasco de-icers use a propeller system that creates a vertical or horizontal movement of water to prevent ice from forming near docks, boat shelters and shorelines. The de-icer performs by moving warmer, denser water upward from the bottom of the pond or lake and circulates the water upward to the surface and sideways creating an agitation that reduces or eliminates ice build-up creating a large ice-free surface. Installation with a horizontal float or with a universal dock mount are options that allow you to precisely direct the movement of the water to strategically and precisely de-ice a particular structure. Ideal for fresh or salt water applications. How to choose your deicer Choosing the right de-icer is easy, refer to the ice opening chart (pdf) to find the best model and application kit for your needs. If Kasco de-icers do not meet your needs, visit the Thawline Linear De-Icers page. All Kasco de-icers are also available in 240V and/or 50 Hertz for the European market, call us for more information. Kasco Marine De-Icing Chart (PDF) Timers & Control Box Options Controlling your Kasco Marine de-icer with a thermostat or timer is a great way to save energy and extend the life of your de-icer by operating it only when needed. The C-10 Thermostat allows you to determine an accurate temperature under which your unit starts.The C20 Thermostat and Timer Control Unit combines the schedule of the day with the temperature at which you want your de-icer to operate. Technical Specifications Suspension ropes - Braided polypropylene yarns. 20′ x 5/16″, 2 lengths included. Galvanized steel protection cage - Propeller protection. Vinyl coated for easy handling. High quality propeller - Specially designed for maximum whirl at minimum energy cost. Power cable - 25 feet of submersible power cable that remains flexible in the air despite temperatures as low as -45ºC (-50ºF). Waterproof connections for ease of installation and handling. Longer lengths are available as an option. Zinc Anode - Changeable anode protecting against electrolytic corrosion. (The anode must be checked annually and replaced if necessary to ensure warranty coverage). Seals - Double seal system to prevent oil leakage from the engine. Shaft - Series #316 stainless steel, suitable for salt water. Ball Bearing - Ball bearing lubricated in oil for better heat dissipation. Oil - The oil used allows for limited maintenance, increased heat dissipation and better protection against moisture. Motor - Standard design, 120V single-phase direct current, oil-immersed, overload-protected motor with automatic circuit breaker. Capacitor - The capacitor ensures proper starting and operation of the motor. Motor housing - Stainless steel, corrosion resistant, saltwater compatible. 2-years warranty Check with local authorities to ensure that the addition of icebreakers is permitted in your municipality. The de-icing area should be well marked with a sign to warn all persons of the hazard. To be used with all types of de-icing systems. Caution: Avoid bathing too close to the de-icer to reduce the risk of electrocution. Tech Sheet (PDF) Owner's Manual (PDF) Maintenance of Kasco Marine Units (PDF) Installation / Security Suspension with ropes - Vertical position - For de-icing in a circle shape All Kasco de-icers include 2 x 20-foot ropes to suspend the de-icer under the dock or boat. These ropes are included in the de-icer box. Hang the system vertically on either side of the structure at a depth of 4 to 5 feet from the water surface. A vertical installation produces a circular de-iced surface. Another possibility is to attach the de-icer to each side of the boat with the suspension ropes so that the de-icer follows the tide or water level. Horizontal float mount – Horizontal position – Produces long elongated pattern when no dock is available You can also use the optional horizontal float set to create an elongated ice free space. The de-icer installed under the horizontal float can be positioned at different angles for added versatility. Ideal for : Shallow water Places where there are water level fluctuations such as: a tide or in a large lake where the waves are high. Sites to be de-iced where there are no docks or structures. Installation with universal dock support - Angled position - For elongated de-icing The Universal Dock Support is made from thermal plastic components, corrosion protected steel and stainless steel to withstand the worst marine conditions. A stainless steel rod of 1 inch diameter and 10 feet in length must be supplied by the purchaser to attach the de-icer and dock and structure mounting kit. With the new Easy Lock handle, adjustments in the water are child's play.This option is ideal for creating an angle at the de-icer. It gives a very good precision of the surfaces to be de-iced. It is often easier to de-ice a boat by installing the de-icer at the bow and angling it towards the stern of the boat. If the water movement is directed towards the shore or a retaining wall, the water current will be directed on each side of the shore or wall to create a "T" shaped de-icing section. Industrial Dock Mount Kasco's industrial dock support, made of corrosion-resistant metal, requires 1.5" I.D. stainless steel pipe threaded at both ends and measuring a maximum of 10 feet (not included). It is manufactured to meet the most stringent environmental requirements. Moreover, thanks to its unique design, you can easily modify the angle, depth and positioning of the de-icer. Underwater Stand Our new underwater stand gives you perfect freedom for sitting your De-icer for optimal efficiency as well as minimum visual impact. Works for ponds and along lakeshores in water at least 4 to 5 feet deep, it is easy to lift and takes only 10 to 15 minutes to assemble with the user's guide. Non-rusting aluminum frame for maximum durability Adjustable angle so unit pointing where you want it The aluminum support is heavy enough to stay at the bottom of your pond without coming to the surface Quick assembly in less than 15 minutes Security Check with local authorities to ensure that the addition of de-icers is permitted in your municipality. The de-icing area should be clearly marked with a sign to warn anyone of the danger. For use with all types of de-icing systems. Click here to purchase the thin ice sign. Caution: Avoid bathing too close to the de-icer to reduce the risk of electrocution.

$1,422.96 CAD - $2,425.50 CAD

See the details

Thawline Bubbler Deicing System

This Thawline de-icing system uses our Bubble Tubing® technology, which has been well tested over the past 20 years. Our Thawline de-icing systems available online are standard types. Contact us for customized systems! Benefits The principle behind de-icing involves the physics behind the relationship between water temperature and the depth at which the diffuser is placed. When air bubbles are created at the bottom of the basin and rise to the surface, they drag warmer water to the surface, preventing the formation of ice. This principle, combined with the rapid rise of bubbles that create water movement on the surface, provides an effective de-icing solution even in the coldest of conditions. The flexibility of the Thawline's diffuser hose allows for more precise targeting of the sections you wish to de-ice. For example, long and narrow corridors can be de-iced over long lengths to allow the passage of barges or boats. It is also easier to de-ice without opening a large area in the ice when using Thawline, since those can increase the risk of accidents in winter. Read our case study realized with our Thawline system : Click here Standard Systems Available: Client testimonial: " I installed my new system (with cabinet) a short distance away from the cottage. The new system runs without any residual noise or vibration being heard in the cottage-I’m so happy!! " Thawline de-icing systems use Bubble Tubing®, and are powered by the appropriate compressor for the job. These systems are efficient and reliable at any scale. They have no mechanical, moving or electrical parts in the water. The systems are designed for both fresh and salt water applications. Technical Specifications The Thawline Linear Icebreaking System de-ices along the shoreline, around boat shelters, between rows of docks, in areas where you want to eliminate the danger of property damage due to the uplift, compression and expansion of ice. - Unlike propeller de-icer technology, which creates a large de-iced section, Thawline creates a thinner, and therefore more precise, de-iced area along the targeted section. - CFD (computer modeling validation possible for large projects). - Avoids having to remove and store your pleasure boats during the winter, saving time and money. - Allows for great precision and flexibility in installation. - Can be used all year round to de-ice in winter and improve water quality in summer. - No electricity or machinery touching the water. - Causes less condensation compared to a de-icer with a propeller. - Generally saves electricity compared to other types of de-icers. Components US, CSA and CE approved piston compressor Compressor base or cabinet Air supply lines Torpedo Bubble Tubing® diffuser Accessories, installation manual and technical support available Call us for advice: if your project requires a Thawline system with multiple lines or for large areas, we have Bubble Tubing® ¾'' or 1.25'' and industrial compressors that will meet your needs. User manual (PDF) Tech Sheet (PDF) Bubble Tubing start-up procedure (PDF) Security Check with local authorities to ensure that the addition of de-icers is permitted in your municipality. The de-icing area should be clearly marked with a sign (include with the Thawline) to warn anyone of the danger. For use with all types of de-icing systems.

$1,919.00 CAD - $3,729.00 CAD

See the details

Bubble Tubing®, Fine Bubble Linear Diffuser

Exclusive to CanadianPond.ca, Bubble Tubing® is a linear air diffuser for aeration, de-icing and bubble curtains. It is designed and manufactured in Canada under our specifications. It provides a substantial and efficient transfer of oxygen to water. Benefits Fine bubble diffusers such as our Bubble Tubing® produce many tiny air bubbles (between 1 and 3 mm). These tiny bubbles rise steadily from the depths of all manners of aquatic landscapes, from wastewater treatment basins, to waterways, canals, ponds, lakes and lagoons. These bubbles provide a substantial and efficient mass transfer of oxygen into water. This oxygen, combined with organic nutrient sources, such as sewage and sediments, allows naturally occurring bacteria to produce enzymes to help break these sources down. Available Formats (Inside Diameters) 15 mm ( ½”) : Standard kits available online to purchase. 20 mm ( ¾”) : Contact us for a quote 25 mm (1”) : Contact us for a quote 30 mm ( 1 ¼”) : Contact us for a quote High oxygen transfer rate. A full evaluation of its oxygen transfer capabilities by an independent firm is available on demand. Applications range from farm ponds to the largest industrial projects. Suitable for fresh and saltwater applications, from shallow to deep waters. Inner pressure prevents clogging; tubing is low maintenance and anti-fouling. No moving parts or electricity in the water. Highly resistant PVC (chemicals, salinity, temperature). Weighted and non-weighted formats available. Tubing can be purchased with all the necessary hardware, ready to install. Our Bubble Tubing® Products Bubble Tubing® is sold standard cut, custom per foot, or by rolls of 500′. Contact us for prices and details.It is also a component of: CanadianAir Aeration Systems Mini-Air System Thawline Bubbler Deicers OctoAir Industrial Diffuser for aeration or deicing (embedded in the stainless steel frame) SalmoAir® Diffuser for upwelling in Aquaculture Technical specifications Made using highly resistant and flexible PVC plastic, Bubble Tubing® keeps its shape and does not kink. When entering the tube, the compressed air creates an internal pressure. Precise perforations on both sides, going the entire length of the hose, allow this compressed air to be released in microscopic bubbles. Their size helps prevent the hose from fouling, a common problem seen in porous diffusers. Once released, the rising air forms a uniform bubble curtain that optimizes the transfer of oxygen. It also promotes water circulation throughout the water column, as it creates a rising current. Using Bubble Tubing® reduces pressure drops and does not require any underwater electricity. Bubble Tubing® offers a superior global aeration performance compared to other aeration devices. Bubble Tubing® reduces power consumption, installation and maintenance costs substantially. When used in de-icing, the bubbles exiting the Bubble Tubing® drag the denser, heavier and warmer water from the depths to the surface. This movement of warmer water inhibits the formation of ice. Bubble Tubing® has an excellent Standard Oxygen Transfer Efficiency (SOTE) and a great Standard Aeration Efficiency (SAE). Please note that Bubble Tubing® will float in salt water. Included in the box (For kits sold online only) 1x Bubble Tubing® diffuser 1x Check Valve 2x Collars Instructions Warranty : 1 years coverage on manufacturing defects. Bubble Tubing® Sizing I.D. sizes available: 15 mm ( ½”), 20 mm ( ¾”) Contact us for a quote, 25 mm (1”) , 30 mm ( 1 ¼”). Available in weighted and non-weighted formats for 15 mm ( ½”), 20 mm ( ¾”) formats. 20 mm ( ¾”), 25 mm (1”) and 30 mm ( 1 ¼”) formats have an integrated stainless steel cord as ballast, for strength and weight. Available Lengths: roll, spool, special run and special cut lengths. Contact us for details. TOTAL Bubble Tubing® lenght Compressors PSI min Total CFM Torpedo Max 25 ft Thomas 25 psi 1.24 CFM 300 ft 50 ft 1/4 HP Tech-Air 25 psi 3.8 CFM 500 ft 100 ft 1/2 HP Tech-Air 25 psi 5.5 CFM 700 ft 150 ft 3/4 HP Tech-Air 25 psi 7.4 CFM 800 ft Bubble Tubing® Test Results In 2011 we tested the oxygen transfer capabilities of Bubble Tubing® through an independent firm, GSEE Inc of Laverne, Tennessee. The tests were carried out on the ½”, ¾” Bubble tubing® and the OctoAir-10 industrial diffuser. In the summer of 2017 we gave GSEE Inc. another mandate to test the Bubble Tubing® at higher airflows and deeper depths, while also carrying out testing on our 1” Bubble tubing® and OctoAir-60 industrial diffuser. “Overall, the results obtained for the CanadianPond.ca Products Ltd. aeration systems were uniformly excellent and produced some of the highest SOTE values GSEE Inc. has observed.”Gerald L.Shell GSEE Environmental Consultants, LaVergne, TN, Sept.2011 Tech Sheet (PDF) Operations / Installation No matter the scale of operations the same basic principle applies: a compressor is connected to Bubble Tubing® through a heat hose line equipped with a check valve. We offer all the necessary products from start to finish to fully set-up a reliable and efficient aeration system for you. We can size the compressor for the application, suggest tubing layout, suggest cost effective design modifications, and offer to troubleshoot. Our experience designing aeration and de-icing systems with Bubble Tubing® is substantial, and our expertise is sought for many aeration projects. How to install Bubble Tubing (PDF) Installation Manual (PDF) Bubble Tubbing® require a compressor, costumers may choose between piston or diaphragm compressor. (Shop compressors here.) Compressor must be installed in a cabinet. This cabinet need to allow good air circulation to avoid overheating and protect de compressor from the weather. (More about cabinets here.) If the compressor is not installed in a cabinet, it is necessary that it is protected by a ventiled shelter. Once the shelter is identified, you will need to mount the compressor on its base and secure it with screws either to the wall, floor or on a shelf. Securing the base prevents the compressor from moving while it is running. It is not recommended to use an extension cord, make sure the electrical outlet is within reach of the compressor and fan wires; 1.8 m (6 feet). Schematic of a diffuser with Bubble Tubbing®; Before connecting the Bubble Tubing® to the feeder line, unroll it, making sure it is not twisted. Tubing well straighten allows a uniform dispersion of air through all its length. Let the tubing rest unrolled before the installation of the system. Bubble Tubing® is also compatible with torpedo. (More about Torpedo here.) If requested in advance, the Bubble Tubing® can already be connected to the check valve (assembly cost may apply). If installed in a large pond, Bubble Tubbing® installation can be done with a boat. Compressor must be started, unroll the pre-assembled hose to the shore and put the rest of the roll in the boat. While keeping the Torpedo feeder line in hands, go on the water and uncoil the Torpedo line until you reach the desired location for the Bubble Tubbing® diffuser. With the diffuser already connected to the Torpedo air feeder line, slowly continue lowering into the water the diffuser as it self-sinks to the bottom. With the compressor turned on, you should see bubbles and be able to use them as visual reference to make sure the tubing is diffusing through its length. If installed in a smaller pond, it is also very possible to install the system without a boat. (It is even recommended.) Start the compressor right before installing the diffuser in the water, the bubble will guide you to settle the diffuser at the desired place in the water. TUse a long rope (twice the length of the pond) and a small cord (1 to 2 feet long). Form a loop at the end of the diffuser using the small cord (loop shown in the images below). Pass the long rope through this loop, and while holding both ends of the long rope, use it to pull the diffuser into place in the water. The diffuser will sink into place at the bottom of the water. A second person should be hanging on the feeder line to help with the placement of the diffuser. Once in line with the wanted position, release one end of the long rope and pull on the other end to retrieve your rope. Do not underestimate positionning of the Bubble Tubing®, air is lazy, it will find the quickest way to go up. Place the Bubble Tubing® at the same depth keeping it as level as possible (maximum 1 foot drop). The tubing can be placed in a circle, curve, or straight line to follow a continuous bathymetric line (level curve at the bottom of the pond). Note that even if the Bubble Tubing® does not bubble evenly, you will still ensure a “vertical” water circulation in your pond. We recommend the use of a "depth finder" tool if you do not know the level curve at the bottom of the pond. If you install your unit into a body of water that is extremely stratified, use caution as you start it up. Suggested startup time for the unit for a stratified lake might be initially running for 1 hour per day during daylight hours for the first week and gradually increase operation by increment of 1 hour until running continuously. Sunny days are preferable to cloudy days because photosynthesis provides oxygen while the water circulates and mixes. For more information on the soft start procedure, click here. Applications Our Bubble Tubing® has been used for over a decade in a wide array of applications by various industries, governments, and private clients. Manufacturing and processing plants, mining, port authorities, aquaculture, agriculture, waterways and canals, parks and recreation, engineering, landscaping and reclamation firms, marine construction, universities and research facilities, ponds and lakes, are all markets currently using Bubble Tubing®. You can now find Bubble Tubing® on every continent of our planet. Aeration, Deicing and Bubble Curtains applications include (but are not limited to the following): Aerating various bodies of water such as: Sewage lagoons, wastewater treatment process plants, leachate ponds and septic systems; Earthen ponds, dugouts, lakes; Waterways and channels; Stormwater retention ponds. Deicing docks, power plant water intakes, marina slips, shoreline and water retention structures, nautical structures and ports, industrial ship moorings, ocean freight & maritime transport, pumping operations and nuclear power generating plants. Efficient Bottom-to-Top Water Circulation and Mixing for water treatment, deicing, and other applications Pathogen Reduction, the bubbles lift deeper waters to the surface and expose them to UV rays that destroy some types of pathogens Underwater Air Bubble Curtains for: Aquaculture, to create barriers between harmful algae blooms and the fish Protecting fish and marine mammals from underwater shock waves caused by blasting, pile driving, stripping, drilling, seismic oil operations and other such underwater endeavors that produce noise Creating a physical barrier to divert marine wildlife and floating debris. Bubble barriers can prevent or reduce the presence of jellyfish, fish, drifting plant material, debris, sediments, etc. behind or within the bubble curtains Diverting marine mammals away from offshore oil platforms, wind power farm construction and continuous operations' vibrations and noises (machinery and engine noise) Containing oil spills within a given area Water Quality improvement for increasing water clarity, reducing algae blooms and reducing hydrogen sulphide (H2S) production for odour suppression.

$249.00 CAD - $779.00 CAD

See the details

Kasco Marine Industrial Impeller De-Icers

Protect your docks, boats and submerged structures with a Kasco Marine industrial de-icer. Industrial units are built to withstand the demanding environments of industrial or harsh applications. Benefits and Informations Winter ice can damage your dock to the point of complete destruction. The thicker the ice gets, the more it also expands. This can literally destroy your dock. When the water level in a lake changes in the winter, the ice surrounding your posts can tear them off the sea floor.  The ice clinging to the structure shows how securely the expanding ice was attached. Kasco Marine de-icers are specially designed to be suspended from a dock, industrial barge or boat to prevent damage caused by ice expansion and water level variations. This animated video illustrates two of the ways you can position your de-icer. Kasco de-icers use a propeller system that creates a vertical or horizontal movement of water to prevent ice from forming near docks, boat shelters and shorelines. The de-icer performs by moving warmer, denser water upward from the bottom of the pond or lake and circulates the water upward to the surface and sideways creating an agitation that reduces or eliminates ice build-up creating a large ice-free surface. Installation with a horizontal float or with a universal dock mount are options that allow you to precisely direct the movement of the water to strategically and precisely de-ice a particular structure. Ideal for fresh or salt water applications. Kasco Marine de-icers, also known as circulators or agitators, are available at CanadianPond.ca, your Kasco Marine dealer in Canada. Shipping Some products may face a longer shipping delay (approximately two or three weeks), let us know if your order is required before a due date, we will let you know if we are able to meet your expectations as soon as possible. Order now or contact us. Technical Specifications Unless otherwise specified, all industrial de-icers come with a quick-connect ferrule for the part connecting to the de-icer. The other end of the cable has no electrical plug, it has 3 bare strands. Electric cables are all compatible with 120 V and 240 V unless otherwise indicated. Please refer to an electrician for connections. Quick connect : Bare Wires : Galvanized steel protection cage - Propeller protection. Vinyl coated for easy handling. High quality propeller - Specially designed for maximum whirl at minimum energy cost. Power cable - submersible power cable that remains flexible in the air despite temperatures as low as -45ºC (-50ºF). Waterproof connections for ease of installation and handling. Oil - The oil used allows for limited maintenance, increased heat dissipation and better protection against moisture. Motor housing - Stainless steel, corrosion resistant, saltwater compatible. 2-year warranty See technical specifications for each model here: 1HP Kasco Marine De-icer, 120V.2HP Kasco Marine De-Icer, 240V. Check with local authorities to ensure that the addition of deicers is permitted in your municipality. The de-icing area should be well marked with a sign to warn all persons of the hazard. To be used with all types of de-icing systems. How to Choose your Deicer Choosing the right de-icer is easy, refer to the ice opening chart (pdf) to find the best model and application kit for your needs. If Kasco de-icers do not meet your needs, visit the Thawline Linear De-Icers page which can also be used for industrial projects. All Kasco de-icers are also available in 240V and/or 50 Hertz for the European market, call us for more information.Kasco Marine De-Icing Chart (PDF) Note: Several factors can affect the size of the opening created by a de-icer, including temperature, water depth, and the size of the water body. This chart is a tool to assist in decision-making but can vary significantly depending on the environment in which it will operate. Timers & Control Box Options Controlling your Kasco Marine de-icer with a thermostat or timer is a great way to save energy and extend the life of your de-icer by operating it only when needed. The C-10 Thermostat allows you to determine an accurate temperature under which your unit starts.The C20 Thermostat and Timer Control Unit combine the schedule of the day with the temperature at which you want your de-icer to operate. Installation / Security Unless otherwise specified, all industrial de-icers come with a bare cable, please refer to an electrician for connections. Suspension with ropes - Vertical position - For de-icing in a circle shape All Kasco de-icers include 2 x 20-foot ropes to suspend the de-icer under the dock or boat. These ropes are included in the de-icer box. Hang the system vertically on either side of the structure at a depth of 4 to 5 feet from the water surface. A vertical installation produces a circular de-iced surface. Another possibility is to attach the de-icer to each side of the boat with the suspension ropes so that the de-icer follows the tide or water level. Horizontal float mount – Horizontal position – Produces long elongated pattern when no dock is available You can also use the optional horizontal float set to create an elongated ice free space. The de-icer installed under the horizontal float can be positioned at different angles for added versatility. Ideal for : Shallow water Places where there are water level fluctuations such as a tide or in a large lake where the waves are high. Sites to be de-iced where there are no docks or structures. Installation with dock support - Angled position - For elongated de-icing Kasco's industrial dock support, made of corrosion-resistant metal, requires 1.5" I.D. stainless steel pipe threaded at both ends and measuring a maximum of 10 feet (not included). It is manufactured to meet the most stringent environmental requirements. Moreover, thanks to its unique design, you can easily modify the angle, depth and positioning of the de-icer. This option is ideal for creating an angle at the de-icer. It gives a very good precision of the surfaces to be de-iced. It is often easier to de-ice a boat by installing the de-icer at the bow and angling it towards the stern of the boat. If the water movement is directed towards the shore or a retaining wall, the water current will be directed on each side of the shore or wall to create a "T" shaped de-icing section. Security Check with local authorities to ensure that the addition of de-icers is permitted in your municipality. The de-icing area should be clearly marked with a sign to warn anyone of the danger. For use with all types of de-icing systems. Click here to purchase the thin ice sign.

$2,766.54 CAD - $5,947.90 CAD

See the details

"Danger Thin Ice" Sign

Essential for the safety of walkers and snowmobilers during the use of de-icing systems. Technical specifications Dimensions: 16 in x 14 in Material: coroplast. Warranty : 1 year coverage on manufacturing defects

$19.00 CAD

See the details

Kasco Marine Dock Mounts

The dock mount is a simple and effective option to mount your Kasco Deicer or AquatiClear® to your dock. This mount allows for either a vertical or several angled deployment positions. DOCK MOUNT ONLY. DE-ICER IS NOT INCLUDED. Universal Dock Mount Kasco’s universal dock mount is made out of stainless steel mounting hardware and requires a corrosion-resistant stainless or galvanized steel pipe (1″ I.D. maximum 8 feet long, not included) making it a great choice for docks, piers, marinas and other waterfront property. A pipe of this kind can commonly be found in the plumbing section of most hardware stores. Using its unique design, you can easily change the de-icer’s angle, depth and position. Will fit units 1 HP or smaller. Assembly manual PDF: Click here to download Manufacturer: Lifetime The picture below shows what is included in the box: Industrial Dock Mount Kasco’s industrial dock mount features extra heavy-duty stainless steel mounting hardware making it a great choice for marinas and other properties with strong tides, currents, or high volumes of boat traffic; they work better in harsher environments. Using its unique design, you can easily change the de-icer’s angle, depth and position. PLEASE NOTE: you must buy a thick-walled galvanized or stainless steel pipe to complete this dock mount kit (the pipe is not included). The pipe should be 1.5″ I.D., schedule 40, and no longer than 10 feet long. One example would be galvanized steel dock posts (1 11/16” O.D.), commonly available in hardware stores. Will fit all sizes deicer units, including 2 HP and over. Manufacturer Warranty: Lifetime Assembly Manual PDF : Click here to download

$499.80 CAD - $845.25 CAD

See the details

Underwater Stand for AquatiClear Circulators & Kasco De-icers

New from CanadianPond.ca, this underwater stand can be used with either a Kasco Aquaticlear Circulator or deicer away from existing structures and out of view. Perfect for finding the optimal angle and location for effective water circulation! *Circulator not included* Benefits Our new underwater stand gives you perfect freedom for sitting your AquatiClear or De-icer for optimal efficiency as well as minimum visual impact. Works for ponds and along lakeshores in water at least 4 to 5 feet deep, it is easy to lift and takes only 10 to 15 minutes to assemble with the user's guide. Non-rusting aluminum frame for maximum durability Adjustable angle so unit pointing where you want it The aluminum support is heavy enough to stay at the bottom of your pond without coming to the surface Quick assembly in less than 15 minutes Click here to shop AquatiClear circulators Click here to shop Kasco De-icers Technical Specifications Assembled, the product has the following dimensions (including legs): 44“ depth 26.5” wide x 27” high (at lowest setting). The aluminum support is packaged in a large flat box and weighs 21 lb. Designed for all AquatiClear circulator models and Kasco De-icers. 1-year warranty. Included Materials and Use The AquatiClear aluminum circulator support comes complete with everything you need for assembly: User guide Frame pieces & screws Circulator not included Instruction (PDF) : Click Here

$809.00 CAD

See the details

Kasco Marine Floats

We provide a range of mounting options for your de-icers and circulators, ensuring optimal placement and water flow. Choose the option that suits your needs, or feel free to contact us for guidance! Horizontal Float Kasco Horizontal Float Assembly 213001 is the perfect mounting option for all Kasco de-icing and circulator units. Works great where no dock or boat is available to mount the unit to, as well as in shallow water operations and in areas where large tidal fluctuations occur. Warranty: 1 year

$735.00 CAD

See the details

Kasco Marine Timers & Control units

Control boxes operated as Thermostat, Timer and Photocell options. Benefits Whenever you are dealing with electricity and water, safety is always the first and foremost concern. That is why Kasco’s Fountains, Robust-Aire Aerators, Water Circulators, and Impeller De-Icers and Control Panels are ETL approved to UL and CSA standards for safety in the water. Kasco’s Control Panels come standard with all fountains and are optional with de-icers or circulators. The Kasco Marine Timer and Control Panels are the interface through which you can control your aerators, circulators, fountains and de-icers. They will protect your equipment from power surges and hefty electrical bills! Use the control panels to turn your equipment on and off using the timer function, through perceived light in the photo cell, by temperature or any combination of these features. Available in 120V and 240V models. Technical Specifications Kasco offers 120V (C-10, C-20 and C-25) and 240V (C-85, C-95) control panels, that include GFI protection rated to protect you and your equipment from harm. A photo cell option is available on the C-25 for use with the optional lighting kits, and a timer dial for programming operation (C-20 and C-25). Contact us for pricing for 240V models: C-85 (240V single phase, Aquaticlear, Fountains and Surface Aerators up to 2HP) C-95 (240V single phase, 3 - 5HP Fountains and Surface Aerators) C-10 Manual C-20 Manual C-25 Manual Models details C10: Controls what temperature the unit turns on when deicing. Operates between 0-80°F. C20: Controls what temperature and time unit turns on when deicing. Operates between 0-40°F. C25: 24-hour timer, GFCI protection and photocell outlet for optional lighting control. *C85 and C95 control boxes can be ordered upon request. Security Check with local authorities to ensure that the addition of de-icers is permitted in your municipality. The de-icing area should be clearly marked with a sign to warn anyone of the danger. For use with all types of de-icing systems. Click here to purchase the thin ice sign.

$220.50 CAD - $515.97 CAD

See the details

Products

Aeration Accomplishment

Products

Deicing accomplishment

Products

Floating Fountain Accomplishment

Products

Bioaugmentation Accomplishment

Products

Aquatic Tools Accomplishment

Applications

Visit Bubbletubing.com website! Dedicated to this technology

Contact Us

Contact us to learn more about our service offering

Accomplishments

Categories

Degradation of Organic Matter with Aeration

Resources

Categories

New Articles

Deicing

Kasco Marine Impeller De-Icers

Thawline Bubbler Deicing System

Bubble Tubing®, Fine Bubble Linear Diffuser

Kasco Marine Industrial Impeller De-Icers

"Danger Thin Ice" Sign

Kasco Marine Dock Mounts

Underwater Stand for AquatiClear Circulators & Kasco De-icers

Kasco Marine Floats

Kasco Marine Timers & Control units

Do you have a question or would like more details?