Aeration

38 products
  • Diaphragm Compressor (Thomas)

    Simple but performant compressor for medium-sized basins 20 ft deep max. These are small units using a diaphragm with aluminum plate, designed to deliver a pressure of 20 PSI with 1.24 CFM of airflow (enough for one diffuser) Benefits Aeration helps reduce sludge, degassing ammonia and methane, and removing CO2 from treated water. Aeration has also been shown to improve oxidation and clarify water in settling and discharge basins to meet effluent standards. CanadianPond.ca offers you a wide selection of compressors for aeration. Since aeration technologies are constantly evolving, it has become possible to make energy-efficient choices while avoiding compromises. If you want to buy these compressors online, please make sure you know what is included and what isn't with the compressor.  Online sales are typically for people with a basic knowledge of these compressors. We also strongly recommend clients purchase a compressor cabinet from us versus rigging up a home made alternative. Our cabinets are safe, well ventilated, secure, and provide noise reduction.  Contact us if you have any doubts about which model to choose!   Technical Specifications Online sales are typically for people with basic knowledge of these compressors. Contact us if you have any doubts about which model to choose! This diaphragm compressor is designed to give you more pressure, and an airflow similar to linear compressors. These are small units using a diaphragm with aluminum plate, designed to deliver a top pressure of 20 psi or 1.38 bar with 1.24 CFM of airflow (enough for one diffuser). You will find this compressor in the Mini-Air aeration system kit.CDI14: ¼HP, 115V Diaphragm compressor, 3A, 1.24CFM, 30 PSI max rated pressure Includes:- 20 PSI pressure relief valve- Air filter - 6' electrical cord with plug- 1 year manufacturer's warranty- 58-60 dB at 3 ft. Heat hose and accessories included in the option 0-1-CADS14.30-115. You can also purchase the repair kit for this compressor on this page (RKCDI14.30) Tech sheet   Installation Maintenance service available through our after-sales department. Contact us for a quote! Preparing your compressor for winter (PDF)  Aeration system installation instructions (PDF)        

    $89.00 CAD - $689.00 CAD

  • Cabinets and mounting bases for compressors

    At CanadianPond.ca we offer a complete range of cabinets for compressors protection. Our cabinets are designed to extend the life of the compressors they house. Contact us and we will be able to guide you on the right firm for your needs. Benefits Compressor cabinets provide good ventilation for compressors and are insulated to help reduce noise. In addition, your cabinet protects the compressor (s) from the elements and vandalism. Cabinets are an additional investment that is well worth it for any aeration, deicing or bubble curtain systems. The stainless steel mounting bases reduce compressor vibration and help keep the air flowing around it. Client testimonial: " I installed my new system (with cabinet) a short distance away from the cottage. The new system runs without any residual noise or vibration being heard in the cottage-I’m so happy!! " Compressor cabinets As ventilation specialists, we make sure that the entire aeration is well designed for optimum performance and worry-free for many years to come. We design the cabinets for the maximum performance of the compressor.  Cabinet specifications Cabinet  CAB1  CAB2  CAB56    Compressor(s) / Compresseur(s)  1  2  5, 6  Compressor size / Force du compresseur    ¼, ½, ¾HP      ¼, ½, ¾HP      ¼, ½, ¾HP +  some industrial compressor / certains compresseurs industriels    Dimensions  28.25" (72 cm) x 16.25" (41 cm) x 22" (56 cm) H.  40.5" (103 cm) x 16.25" (41 cm) x 22" (56 cm ) H.  60.5" (154 cm) x 31.5" (80 cm) x 27" (69 cm) H.  Sound Insulation / Réduction du bruit  10 dB  10 dB  ---  Fabrication  Steel with powder coated paint / Acier avec peinture en poudre  Steel with powder coated paint / Acier avec peinture en poudre  304 Stainless steel / Acier inoxydable 304  Ventilation (fan)  162 CFM 6" (15 cm)  162 CFM 6" (15 cm)  290 CFM 6" (15 cm)  Mounting of compressors / Montage des compresseurs  Directly in cabinet / Dans le cabinet  Directly in cabinet / Dans le cabinet  On compressor mounting base / Sur la base du compresseur  Servicing access / Accès  From top down / Par le dessus  From top down / Par le dessus  Lid & sides remove for easy access / Couvercle et parois amovibles pour accès facile  Heater unit / Unité de chauffage  Optional / Optionnel  Optional / Optionnel  Optional / Optionnel  Power / Puissance  115V, 230V  115V, 230V  115V, 230V  Weight / Poids  58 lb (26 kg)  92 lb (42 kg)  300 lb (136 kg)  Power cord / Cordon électrique  6' (2.7 m.)  6' (2.7 m.)  Wiring done by electrician / Câblage par électricien   Warranty: 1 year Mounting bases for compressors We recommend that compressors be attached to a mounting base to avoid vibrations and thus increase performance and reduce wear on internal parts. The heavy duty stainless steel mounting bases we offer are well designed with many mounting options. Inside a shed or garage, consider a wall or shelving mounting position. In a cabinet, we always recommend the mounting base with integrated fan for optimal performance. Each mounting base includes rubber feet for vibration reduction and all necessary hardware.  Specifications of mounting bases Mounting base / Base  00-BASE-CSP  00_BASE-CDP  Compressor / Compresseur    ¼ HP      ½, ¾HP    Dimension  Length: 13"(33 cm) Width  

    Price on demand

  • Kasco VFX Fountains

    Kasco Marine’s VFX floating aerating fountains are a classic design, great for residential applications as well as medium to large ponds and have been a best-seller for many years. Available from 1/2 to 5 HP.   Description Canadianpond.ca has supplied Kasco Marine VFX aerating fountains and pond aerators to clients in Canada, the United States and in Europe for nearly two decades. These durable aerating floating fountains are engineered and manufactured with pride in Prescott, Wisconsin U.S.A. with intimate knowledge and expertise about fountain engineering and design feature upgrades. As the largest Canadian dealer of Kasco Marine aerating fountains and pond aerators and a Certified Repair and Maintenance Center, you are in good hands with Canadianpond.ca! The classic Kasco “V” fountain pattern gives this aerator model a beautiful and aesthetically pleasing display. It is designed for maximum oxygenation to improve the health of your pond or lake efficiently. The VFX floating aerating fountains are available in 120V or 240V, 60Hz models as well as 240V, 50Hz international model. Clients who use the VFX floating fountain are pleased to enjoy the aesthetic of a fountain, hearing the lovely sound of water splashing and seeing the attractive classic “V” shape spray pattern, while knowing they are adding much-needed oxygen to their pond. When a light kit is added, the enjoyment of your fountain is extended well into the evening hours, adding flare to summer parties, weddings or romantic evenings by the pond. Fountain sounds have the added bonus of drowning out unwanted background noises from highways, lawn mowers or other yard machinery, that can become annoying. A stunning array of VFX floating fountains lit up in different colours, adds sparkle to golf course or municipal park ponds. Our aeration fountains by Kasco Marine are affordable and reliable, coming with a solid 2 to 3 year warranty depending on the model, making them the brand of choice for commercial establishments such as amusement parks, campgrounds, corporate landscape gardens, funeral homes, hotels and gated communities, to name a few. Click here to read up on how to choose the right floating fountain for your pond. Technical Specifications Kasco's aerating fountains are mounted with four propeller blades to maximize the flow of displaced water while minimizing the energy required to make them function. Kasco fountains are among the most energy efficient on the market, in regards to the projected rate per kilowatt/hour of electricity consumed. These VFX models have a beautiful aerating pattern that will improve the water quality and aesthetics of any pond or body of water. The floating aerating fountains include a GFCI protected control box with timer, GFCI protection and photo eye for light operation. The photo eye allows you to set your timer for the hours of operation and when it is dark the lights will activate. LED or Halogen light kits available in Clear White, Red, Green, Blue and Yellow to extend the fountain’s beauty into the nighttime hours. Lighting enlivens the water display, turning water drops into glimmering jewels of light while providing a resort-like appearance to the water feature. The VFX Series offer increased circulation and oxygenation of thermal-stratified water and help stimulate the natural biodegradation of organic waste (such as grass clippings, leaves and run-off) and pollutants. Oxygen is circulated and absorbed into the water, thereby increasing aerobic decomposition of sunken organic matter. Aeration can help eliminate spring and fall turnover. Aeration helps to promote greater densities of fish.   Specifications : Efficient / Low Power Use: Highest efficiency design for low power consumption versus competing units. Reduces operating costs over the entire life of the unit. Clog Resistant: Unique water-deflecting nozzle design gives you the most clog-resistant model on the market. Needs a minimum water depth to function. Robust Motor: Environmentally friendly design with a hard-face internal mechanical seal and external lip seal for protection against leaks. Seals are silicone carbide for long life. Long-life top and bottom ball bearings. Food-grade oil lubricated for excellent heat dissipation. Corrosion Resistant: Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are made of stainless steel. Low Maintenance: Clean the motor housing once or twice per year and replace the sacrificial zinc anode when visibly corroded. Fully Tested: ETL listed to stringent UL and CSA Safety standards. Shipping: Ships Easily in Canada and abroad Dependable: Backed by a two-year warranty or three year warranty on 2 & 5 HP models. Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50′ to 500′ or quick disconnect option. Includes two 50′ braided nylon mooring ropes (3 for the 2 & 5 HP models). Warranty periods include: 2 years on 1/2, 3/4, and 1HP units3 years on 2 and 5HP units Kasco Marine Fountain Care Checklist (PDF)  Specifications flyer (PDF) Installation Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50′ to 500′ or quick disconnect option. Includes two 50′ braided nylon mooring ropes (3 for the 2 & 5 HP models). Anchoring: The fountains include two 50 'heavy-duty nylon anchor ropes (3 for 2 and 5 HP models). Note that for 240V fountains, an electrician must be present at the time of installation to connect the control box to the electric pannel and to connect the wire to the control box as well.  Package Includes: Motor unit Float Bottom screen Control panel with GFI protection Mooring lines Power cord 50Hz units include a motor unit, 15m mooring lines and power cord We offer installation services. Click Here to find out more. 

    $2,260.32 CAD - $13,024.72 CAD

  • SureSink™ Weighted Air Line Tubing

    CanadianPond.ca offers you a varied choice of aeration tubing for your systems. SureSink™ weighted air line tubing is a Kasco product that combines with their Robust-Air aeration system if your need for tubing is greater than the included quantity. Technical specifications Do you need more air line tubing for your Kasco Marine Robust-Aire Aeration System or for another kind of small aeration system? Consider Sure-Sink ⅜″ tubing in 25′ or 100′ lengths. 3/8” Tubing Kit (#773380) – Parts Included:• (1) 3/8” Diameter x 25' or 100’ SureSink™ Aeration Tubing• (1) 3/8” Barb x 3/8” Barb Fitting• (2) 3/8” Tubing Clamp This tubing is self-sinking and comes with a 10-year warranty. The 50' Sure-Sink ⅜″ tubing has been discontinued by Kasco Marine, we offer our Torpedo Tubing as an alternative. Click here to learn more about Torpedo.  Instructions (PDF)  

    $56.00 CAD - $166.25 CAD

  • Replacement parts for Kasco compressors

    CanadianPond offers replacement air filters and piston repair kits for Kasco Marine's Teich-Aire compressors.  If you are unsure of your compressor model, contact us with your serial number or a picture of your compressor and we will help you make the right choice!  Other repair kits are also available upon request. Description Repair kits for Kasco Marine's Teich-Aire compressors used in CanadianAir aeration systems and Thawline de-icing systems. Replacement filters for compressors. It is recommended that you change your compressor filter every 6-12 months, or more frequently if your compressor is in a dusty environment. Service Center We are the authorized service and repair center for Kasco Marine in Canada. In addition, we can also assist you with repairs on systems of the following brands: Hiblow, Seabin, US Solar Mounts, Vertex Water Features, AquaMaster Fountains. Technical Specifications 1/4HP : One (1) kit is needed to repair one KM-60  1/2HP : Two (2) repair kits are needed to repair one (1) (KM-120) Teich-Aire Compressor 3/4HP : One (1) repair kit is needed to repair one (1) dual piston KM-200 compressor Replacement Air Filters for KM-60 (1/4HP Teich-aire) & KM-120 (1/2HP Teich-aire) compressors Replacement Air Filter for KM-200 (3/4HP Teich Aire) Compressor Warranty: 1 year against manufacturing defects 

    $17.82 CAD - $222.11 CAD

  • Repair Kits for Hiblow Compressor

    CanadianPond offers repair kits for Hiblow compressors.  If you are unsure of your compressor model, contact us with your serial number or a picture of your compressor and we will help you make the right choice! Description Repair kits for Hiblow HP series compressors. Replacement filters for compressors. It is recommended that you change your compressor air filter every 6-12 months, or more frequently if your compressor is in a dusty environment. We know pumps, boosters, compressors and we work with manufacturers to offer the best in the industry. At the moment, most small systems are often diaphragm or rocking piston compressors while medium and large systems use rotary nozzle or screw compressor models. Contact us to discuss your aeration system so we can help you compare with what we offer.Maintenance service is available through our after-sales department. Contact us for a quote! Preparing your compressor for winter (PDF)    Technical Specifications Online sales are typically for people with basic knowledge of these compressors. Contact us if you have any doubts about which repair kit to choose! RKHBHP3040 : Repair Kit for Compressor of model HP30- HP40RKHBHP6080 : Repair Kit for Compressor of model HP60- HP80RKHBHP100120 : Repair Kit for Compressor of model HP100- HP120RKHBHP150200 : Repair Kit for Compressor of model HP150- HP200    

    $59.00 CAD - $189.00 CAD

  • Eco-Purge, Biofilm Removal Product

    If you are noticing that your diffusers are releasing fewer and fewer bubbles then it is likely a biofilm is forming a coating that is restricting airflow by blocking the perforations.   Benefits Eco-Purge is a natural organic product specially designed to clean Bubble Tubing® and other items placed in water that are clogged by biofilm or other deposits.  Active in fresh and salt water.  Safe for aquatic fauna and flora.  Technical Specifications   Eco-Purge is designed to clean the biofilm that forms in the tubing of air lines and diffusers in aeration systems. Biofilm grows slowly, it is an organic or mineral biofilm that limits the effectiveness of the system. It forms naturally and develops more or less quickly depending on various factors such as temperature, water quality, hardness, pH, air pressure, to name a few.To counter this problem, we offer a product that eliminates these deposits while respecting the natural environment: Eco-Purge. Specifically formulated for this application, it penetrates and breaks down biofilm.  The cleaning and descaling power of the product decreases with the temperature. From 15 degrees Celsius and above, we can expect a powerful and rapid cleansing. Below this temperature, a longer contact time or a higher concentration of the product must be expected. We guarantee that the product has been manufactured under strict quality control standards that ensure optimal product quality. SDS (PDF) Dosage, Application and Storage DOSAGE: 250 ml to 500 ml per 30 m of Bubble Tubing® to clean. The dosage may vary depending on the level of dirt accumulated on the products to be cleaned and the temperature of the water in which the product is applied APPLICATION: 1. Mix well before using. 2. Turn off the aeration system.  3. In each air line, pour a minimum of 250 ml to 500 ml per 30 m of Bubble Tubing® to clean.  4. Let stand for 10 to 15 minutes. 5. Restart the systems to push the product out of the lines.   Repeat if necessary.   STORAGE: Store frost-free in a dry, ventilated area. Avoid heat and direct sunlight to preserve product quality.  Wear chemical resistant gloves and safety glasses when manipulating.  

    $37.00 CAD - $77.00 CAD

  • Bio-Purge, Biofilm Control

    If you are noticing that your diffusers are releasing fewer and fewer bubbles, then likely a biofilm is forming a coating that is restricting airflow by blocking the perforations. Benefits Bio-Purge is our leading cleaning/maintenance product for underwater air diffusion systems, including aeration discs and Bubble Tubing®. As with any aeration product, over time air diffusers and bubble tubing will benefit from a maintenance treatment to remove any calcium deposits or organic biofilm that may coat their surfaces and inhibit airflow.   Technical Specifications Bio-Purge is a maintenance product designed to clean aeration lines and diffusers. Biofilm develops slowly covering the small holes designed to release micro-bubbles of air. Factors such as temperature, water quality, water hardness, pH and air pressure all effect if or when a biofilm may form, which explains why there are instances when no biofilm develops, or biofilm develops rapidly.   To counter this problem use Bio-Purge which is an environmentally friendly product to eliminate the bio-film or calcium deposits that may be hindering the efficiency of your aeration system. Similar in characteristics and effectiveness as such well known products as “CLR”, Bio-Purge is designed for use in drinkable water. It is certified ANSI/NSF, and is a product currently used in municipal water treatment reservoirs and is also recommended by Health Canada and the Ministry of Environment (MDDEP). Approved for use both in the US (CFR) and Canada.  Bio-Purge is safe for use in all aquatic environments. Bio-Purge replaces muriatic acid as an effective cleaner and declogger of airstones. Cleaning diffusers or cleaning airstones with diluted muriatic acid solutions is a thing of the past.  Beyond cleaning diffusers and tubing, Bio-Purge is an excellent dispersant/bio-penetrant specifically formulated to control iron, scale, bio fouling, and other filter related problems in potable or industrial water systems. Bio-Purge is a non-phosphate-based product that may be used in water systems to clear away oxidized metal build up, scale deposits, and when used in conjunction with a biocide, bacterial species from filter media. We guarantee that the product has been manufactured under strict quality control standards that ensure optimal product quality. SDS (PDF) Dosage and Application Dosage: Bubble Tubing® ½ I.D.: 1 liter per 100 ft of tubing Bubble Tubing® ¾ I.D.: 1.5 liter per 100 ft of tubing Membrane diffuser disc: 125 ml per diffuser   INSTRUCTIONS:Step 1: Disconnect the main airline(s) that leads to your diffuser disc, air stone or BubbleTubing®.Step 2: Pour in an appropriate amount of Bio-Purge liquid into the airline(s).Step 3: Re-connect the main airline and turn on the compressor briefly to distribute the liquidinto all of the diffuser discs, air stones or Bubble Tubing®.Step 4: Turn off your compressor to allow the Bio-Purge to completely dissolve the biofilm. Thiswill be anywhere from 15 minutes to 1 hour.Step 5: Turn on your compressor. Your diffuser discs, air stones or Bubble Tubing® will becleaned from the inside-out and will be once again performing at their optimal level. Complete Instructionss (PDF)  

    $45.00 CAD - $149.00 CAD

  • SalmoAir® Diffuser

    Upwelling diffuser with the most efficient lift rate (third party validated) for the open cage aquaculture industry. Durable and robust design created specifically with fish health in mind. Low maintenance and easy installation. Benefits SalmoAir® was originally designed for the salmon farm industry but it turns out that it works exceptionally well with other species as well, such as trout or seabass in either fresh or salt water farmed cages. Its non-harming design reduces scale damage and injuries, reducing wound infection and improves overall fish health. The special Yellow Thermoplastic NSF coating improves longevity of the frame while controlling biofouling. Smooth design makes light work for sea farmers who will appreciate how easy it is to clean encrustation of barnacles or mussels. The low operating costs will pay for the SalmoAir® diffusers within months. Operating ranges are from 10 – 30 cfm per units.  They require very little maintenance so that operating costs will be reduced.  Other benefits are improved fish health which translates into greater profits due to reduced fish stress. Furthermore hypoxia is reduced with the aerating and upwelling capacity of SalmoAir®. SalmoAir® come fully assembled and feature its specialized unique anti-fouling coating and corrosion resistance which will ensure years of heavy usage in the ocean. This state of the art upwelling system was developed by CanadianPond.ca Products Ltd. using its unique Bubble Tubing® technology which holds the world’s leading standard oxygen transfer efficiency (SOTE). Colder and rich in oxygen environment reduces fish stress and mortality. Cooler water is heavier and often stratified under warm lighter surface layer, the SalmoAir™  upweller system will uplift cooler water which is often already richer in dissolved oxygen. Operating costs considerably lower than competition. Competitive purchase pricing coupled with durable lifespan and amortization. Validated efficiency equals energy savings. Easily retrofit / exchange existing inefficient upwellers with SalmoAir™ . Non-fouling, low maintenance, reliable, easily serviced above and below the water! 3rd party tested at C-CORE and Fisheries and Marine Institute (Memorial University, NL, Canada). Product development done in actual salmon farms in real conditions for over a decade. Positive fish farmers feedback (deployment, maintenance and upwelling results). Canadian design and manufacture available for the world aquaculture. Patent pending.   Technical Specifications Full 2 years warranty. Operates as low as 10 up to 30 cfm.  Can handle up to 100 cfm if needed. Ships fully assembled, in protected wooden crates for ease of handling on farms. 178 cm diameter (70 inches) frame (plume diameter varies with depth and air flow) Third party upwelling lift rate data (C-Core Engineering + Marine Institute Newfoundland 2023 available upon request) CFD (simulations) validated with field test (2023) available to assist with design, calculations and optimisation   Optimisation means savings and significantly reduced energy costs. Oxygen transfer data available on BUBBLE TUBING® is among the best rating in the industry at 3x more efficient than competition. Diffuser includes BUBBLE TUBING® ¾ inch I.D. The stainless steel frame is coated with a yellow NSF Thermoplastic. 45 kg (100 lbs) model makes it easy to install without the needs of extra weights. Exclusive central hub with integrated check valve. Anodes can be added on the frame as an option for additional corrosion resistance.  

    Price on demand

9 Products

Do you have a question or would like more details?

Contact-us